Ross-Tech VCDS® with a plus of software: Dieselschrauber KPower and KDataScope.
The semiprofessional VCDS diagnostic tool Ross-Tech® MicroCAN for all VAG vehicles based on the Golf5/6/7-platform with CAN bus.
Attention, the system is only usable for the following VAG chassis types:
Please consult your service manual and check if your car is one of the chassis types above!
- 1K-Chassis VW Golf 5 and new Jetta
- 5K/16/AJ-Chassis VW Golf 6
- 5G/AU-Chassis VW Golf 7
- 12/AA-Chassis VW Up!
- 13-Chassis VW Scirocco
- 3C/36/A3/AN-Chassis VW Passat
- 35/AN-Chassis VW Passat CC
- 1T-Chassis VW Touran Minivan
- 1F/AH-Chassis VW Eos
- 2K-Chassis VW Caddy
- 5C/AT-Chassis VW New Beetle
- 5M/5K/52/1K/16/AJ-Chassis VW Golf Plus
- 5N/AX-Chassis VW Tiguan
- 7N-Chassis VW Sharan II
- 8U/FS-Chassis Audi Q3
- 8P/FM/8V/FF-Chassis Audi A3 / A3 Cabrio
- 8J/FK-Chassis Audi TT
- 71-Chassis Seat Alhambra
- 5P-Chassis Seat Altea and Toledo
- 1P/5F-Chassis Seat Leon
- KF/AA-Chassis Seat Mii
- NF/AA-Chassis Skoda Citigo
- 1Z/5E/NE-Chassis Skoda Octavia
- 3T-Chassis Skoda Superb
- 5L-Chassis Skoda Yeti
For older/other vehicles with diagnosis per K-line (KKL), a different diagnostic tool has to be used: VCDS Diagnostic Tool EOBD/OBD2 KKL (USB) or VCDS/OBD2 Prof. Diagnostic Tool KKL+CAN (USB).
Also for diagnostic purposes on non-VAG vehicles over OBD2 we recommend also our VCDS/OBD2 Prof. Diagnostic Tool KKL+CAN (USB).
Because of the built-in license key, always the newest version of VCDS can be used, use software updates immediately without waiting on registration issues. As our customer, you will be automatically notified of new software versions.
With our system you can...
- read control unit information,
- read and erase diagnostic trouble codes (DTC, fault codes),
- check control unit selftest (readiness),
- login into control unit(i.e. to activate cruise control),
- change control unit coding (coding help / LCode coding assistant),
- log data (measuring blocks),
- view measuring graphs from logged data,
- realtime measuring graphs,
- Decoding of all DTCs to error describing texts,
- viewall measuring blocks,
- enable basic settings mode,
- control unit adaption,
- support 7-digit PINs,
- supports VAG KWP 6000 (CAN) and KWP 7000 (UDS),
- Generic OBD2 over ISO9141-2 and ISO14230.
- MOST bus diagnostics.
- Service interval reset assistant.
- Battery coding assistant.
- Vehicle power measurement with KPower. .
- KDataScope VCDS logfile analyzer.
- Read out EDC15 and EDC16 engine ECU mileage. Do you know the true mileage of your car?
Access to the Dieselschrauber-Community, where competent professionals help you with advice and action. A fault database and help for control unit coding complete the support.
The HEX MicroCAN diagnostic hardware has the following features:
- high quality OBD2 plug,
- CAN bus transceiver with integrated protection circuits,
- fast access to ECUs,
- reliable connections also with problematic ECUs,
- dongle functionality, enabled through the built-in VCDS license key (unlimited number of vehicles). Every PC/notebook can be used for work.
All these features are provided by the integrated microcontroller
, whose firmware is developed in tight cooperation with VCDS (VAG-COM Diagnostic System)
. Because of this, our adapter provides the best possible functionality and cooperation with VCDS, that is possible.
System requirements: Laptop/Tablet/PC with Windows (XP, Vista, 7, 8, 8.1 or 10), universal serial bus (USB).